Category Archives for "Home Improvement"

May 13, 2016

How to Protecting a Wooden Table

Wooden tables are very common due to their low acquisition and maintenance cost. They are used at homes, businesses as well as in restaurants. These tables will have a pretty look while new due to their glowing finish, but this aspect is bound to dwindle. This happens due to the daily interactions between the table and users. Kids, pets and uncontrollable weather conditions are some of the factors that cause scratches on the wood. Maintaining this good look will require discipline and use of protective materials. Here are the problems faced by wood tables and how to solve them:

tablecloths

Scratches

This is the main fault. It can be caused by placing and moving rough materials on these tables. Items such as keys and cutlery will rub on the finish and hence peel or scratch. If this happens day in day out, the result is a terrible looking table which you will be embarrassed by when visitors come to use it. Place tray on one edge of the table that is at the entrance of your house, so that you can throw the keys there with no worry of hurting your valuable table. For dishes, use linen or wipe clean tablecloth to guard the table.

Liquids effect

Liquid causes a big problem on wood. If liquids spill on the table, ensure you wipe them off immediately to avoid the wood absorbing it. If this happens, the table will have dents. It is advisable to use coasters atop as they are very affordable and work best in guarding the table. Again placing too hot cups or mugs will affect the finish in while it gets too soft so that when you wipe the table off, you realize the finish peels off. You could use clear glass too which serves the purpose of guarding the table as well as projecting beauty of it through the clear material.

Temperature effect

Too much heat or coldness will significantly affect the table. Placing hot materials such as dishes and mugs will rub off the finish. It is wise to place a hot pad or other material that is not affected by heat, under the hot items. Tables that remain outdoors are prone to high UV rays, which will usually bleach the finish and color of the table. In such a case use parasols or awning. Too much heat on wood will cause cracking. Wood needs a humidity level of 50% – 55%. The room temperature should not be below 70 degrees and not exceed 75 degrees Fahrenheit.

Weathering

This is an aspect that affects outdoor tables. These tables get affected by wind, sun and moisture. At times, they may also have snow building on them. To solve this, order for a wipe clean tablecloth that perfectly fits the table or, look into getting the table reconditioned so it looks as new as when you first bought it. Using parasols and awning is helpful too.

Cleaning strategy

Wood table should be cleaned regularly to remove dirt and dust as well as avoid build ups which may call for scratching as you try to remove them. Use a lint-free cleaning cloth to get the best results.

Choosing The Right Interior Doors For Your Home

If you’re doing a remodel, constructing a home or replacing damaged doors, interior ones, you need to select one that would feel right for you. You should get one which goes in line with your vision. Keep in mind the following points if you’re looking for an interior door.

Interior Doors For Your Home

Interior Door Style

There are slide doors, French doors, pocket and hinged panels among many others.

Panel doors:

These ones are mostly used in residential buildings. They have different patterns, for instance, round tops and also decorative finishes. Some have glass inserts which increase the glamour. In this, you have to go with your personal taste and preference.

Flush doors:

These doors bring about a classic and also a clean option for the home. This door is generally flat and the price is affordable.

Bifold doors:

These ones are hinged together then they fold into one another whenever they are being opened. They are common in a kitchen pantry, closets and also laundry rooms.

French doors:

These are simply hinge doors that are put opposite each other then they swing towards one another when opening them. They are common in home offices, master bedrooms and in music rooms. They add a dramatic twist in the house.

Sliding doors:

They are like interior doors which are mounted on a track. They, however, don’t swing. These doors are advisable to use in places where there is not enough available space. This is because they usually slide back or forth meaning they really don’t need any space either right or left since they do not use it. They can at times be used as a replacement in a room where one had put French doors before.

Pocket doors:

These were there a very long time ago and are coming back in a big way.  They are a little bit similar to the sliding doors. This includes a single door that is put on a rail then to open it; you slide it along the rail to create space. For the modern ones that are coming back, they have an allowance for double doors.  The difference between these and sliding doors is, when you open, they slide into the rail space within the wall frame such that they hide all the door part. This makes it suitable for the places whereby the door needs to stay open most of the time. With these ones, there is no obstruction by the door at all as it stays completely hidden when open.

When selecting a door, you should also consider the material. That is depending on the budget that you are working with and your personal taste. There are various materials to describe but a few of them here. Solid wood:  These doors are sturdy and are extremely resistant to chipping and or cracking. Solid Core: These doors are like the solid wood just that they are made of plywood and are at times filled with fiber in the interior.

Choosing Energy Efficient Windows For Your Home

These days, it has become vital for the homeowners to look for windows which are energy efficient.  This is because when you select an energy efficient window, it goes a long way in helping you to not invest in some systems such as those required to heat or to cool the temperatures in the house. The windows alone should be able to regulate that on their own.

Energy Efficient

The following 4 factors should be considered when you are selecting windows that are energy efficient. You should look at the design, the frame, installation and finally glass.

The Right Frame

Wooden frames are not prone to heat and they are also less prone to the cold as compared to others like one made of aluminum. But then again, this fact does not translate into the wood being the best frame there is out there. There are a wide variety of materials that make these frames such as:

Wood: They are the best when it comes to insulation. However, the downside is that they at times rot which can not be said for the other materials. When in climates that are rainy and or humid, wood is not the best choice at all.

Vinyl: This is a material that is less expensive compared to the others but this does not translate it to being a cheap material. It is energy efficient and if it is installed correctly, it reduces the leaking of air. However, these types of frames are limited when it comes to color varieties so some people will prefer not to have it in their homes.

Aluminum: This material is not so good when it comes to heat, either loss or transfer, they are the best when it comes to extreme conditions such as hurricanes. This is because aluminum windows are stronger than those made from either wood or vinyl.

Wood-clad: The exterior maintenance of wood clad is extremely low thus it is the best since it also has all the advantages that are associated with wood frames. However, these are not advisable to use in conditions that are wet since they are very prone to be intruded by water. This could result in rotting especially in the jambs and in the sills since this is where water pools. However, if one installs these windows correctly, they could add a membrane that is made of rubber this will help with the rotting. One could also put a pan on the sill which would be draining the water that would be getting near the jambs and the sills thus it helps to minimize the moisture interference on the wood hence no more rotting at all. When you choose a window that is filled with argon that is Low-E, it insulates the window pane a lot more. The inside of the house can be protected away from the sun’s heat by using these single window panes. This could help in choosing an energy efficient window.

April 9, 2016

How To Choose The Right Conservatory

Building a conservatory means taking a big financial investment. However, the cost of this will depend on the materials for construction.  You should put in mind the installation cost, the labor charge and the money to prepare the site.  You should then consider using a company that specialises in conservatories.  The following are some practical considerations that you should factor in.

conservatory example

Heat

It can be by use of water, or under floor heating using electricity. You can also fit walls with radiators or you can deduct heat through grills which can be fitted on the floor edges.

Floors

You are advised to lay durable floors that are practical. You could choose between ceramic tile and natural stone for flooring.

Blinds

Blind protects furnishings. They also maintain the temperature all round the year. In addition, it also provides privacy.  You could choose from linoleum blinds; made from wooden strips, Printed blinds and also fabric roller for the blinds. An expert should do this fitting so that they are properly supported, especially due to the high windows.

Garden

You should make sure that lighting has been installed in the garden. It is important to fit this in your budget while planning.

Roofing and Glazing

It is advisable to do double glazing. This is because the glass is of low emissivity. Its metal coat will allow the sunlight to pass through but the heat from the radiators will be reflected back to the conservatory. Roofing will either be glass or polycarbonate. This is lighter and durable material. It is required in structures that do not support the glass weight.

Conservatory Maintenance

The person who installs it for you should guide you on how you are supposed to maintain the conservatory. This includes how to clean, what you should use and the kind of soap that will not interfere with the plants and also tell you how frequent you are supposed to do this. For example, you are not supposed to use abrasive cleaners, and then the surfaces made of timber should be washed down regularly in order to remove any pollution on the surface.

Environmental Issues

It is important to select the correct material that will make up your conservatory frame. In the past, people used aluminum or PVCs; at times they even used hardwood. However, currently, people use timber, which should be from a source that is safe and non-endangered.

Building Regulations and Planning Permission

There is the planning permission which deals with the size and also the visual impact of your conservatory. However, the building regulations relate to the construction itself which is usually reviewed constantly. One should make sure that his or her designer should be up to date with the regulations, also the new ones if any. Planning permission will only be required if the house is found in an area of conservation or a designated place of natural beauty, Also if the house is terraced or has been extended already.

scriptsell.neteDataStyle - Best Wordpress Services